A few years ago, installing a touch screen monitor in your car was something you either saw in the movies or on those wacky, tricked out cars built especially for science fairs. Now nearly all of the newer cars come with them factory installed or at least they can be installed aftermarket quite easily. Through these monitors, drivers can program their GPS navigational system, control their Bluetooth, and set all of their stereo channels all with the tap of your fingertip.
There are a few different ways to have these put in your car too. The most common two are either an in-dash setup keeps the factory look of the car. Then there is the set up which uses a motorized panel frame to fold out of the dash and then in an upward and visible position. Here is a step by step breakdown of how you can install a touch screen monitor system into your car on you own.
The first thing you'll need to do is take a look at your car's dashboard and figure out if it has a double DIN setup or the single DIN setup. It's pretty easy to spot if you know what you are looking for. The double DIN setup for your car's dashboard will allow you to mount a touch screen monitor system which lies flush with the dash. A single DIN setup will not allow this and require you to install a monitor that flips up.
Make sure you have all the right tools to go along with the installation kit and wiring harness you should have previously purchased. Any place that sells car audio systems or offers installation services will have these for sale. If your vehicle does have an installation kit made for it, then roll up your sleeves because you have some work ahead of you in the form of alterations to your dash.
Now you'll need to get underneath the car's hood to disconnect the battery cables from the battery. You'll again need the right size tools to take care of this.
Take the old head unit out. Depending on the make of the car, you'll probably need to remove a few of the dash panels to do this. The old head unit will be held in there with mounting screws. Take these out and the stereo should slide right out of the dash. Once out, disconnect all of the wires and the antenna from it.
Now that you have all the old equipment out of the car, start install all of the new hardware and the touch screen with the installation kit. Seat it securely into the kit so it won't slide out and possibly break.
Now that the monitor is all set to go in the installation kit and ready to be put back into the dash, connect all the car's wires to the preinstalled wiring harness which should already be attached to the touch screen monitor. Connect the audio/video cable to the monitor and always check the user manual if you aren't sure where it goes.
Ok. You're all wired up and ready to go. Now you need to install the monitor back into the dashboard. Of all the steps this is the easiest since it's almost the last one. Secure into the car by tightening all of the screws and replace the dash panels once you've finished doing that.
Reconnect the battery cables back up and start up the car to test out the monitor. If everything went smoothly during the installation, the screen should light up.
Touch Screen Lcd
Special Price!!! LCD Display Monitor Screen+Touch Touchscreen Digitizer+2mm Adhesive Double Side Sticker For iPod Touch 4G 4th Gen 4 Generation
Oct 25, 2011 13:18:54
Click for larger image and other views
LCD Display Monitor Screen+Touch Touchscreen Digitizer+2mm Adhesive Double Side Sticker For iPod Touch 4G 4th Gen 4 Generation Feature
- Original & Seller Refurbished
LCD Display Monitor Screen+Touch Touchscreen Digitizer+2mm Adhesive Double Side Sticker For iPod Touch 4G 4th Gen 4 Generation Overview
Installation instruction is not included.ATTN:
Please avoid using any liquid adhesive or glue to attach the parts. ONLY use the double sided tape included in the package to attach them.
The touch screen flex cable can be broken very easily.
Touch screen is an essential component of a cell phone device.
Ideal replacement for any cracks, scratches or malfunctions.
Products received by customers would be the same as the pictures show.
The installation instruction is NOT included with the purchase.
Please ask for professional assistance if necessary.
Compatible to:
Apple
iPod Touch 4th Generation
Package includes:
1. LCD Screen x1
2. Touch Screen x1
3. Free Suction Cup x1
4. Free Cross Screwdriver x1
5. Free Housing Tool x1
6. Free 3M Sticker (2mm) x1
*Components not on the list are not included.
Estimated shipping time
10-16 working days (United States)
5-10 working days (United Kingdom)
12-20 working days (European Region such as Denmark, Finland, France, Germany, Greece, Russia)
12-24 working days (Remote Region such as South America, Middle East, Africa, South East Asia, etc.)
During long public holidays, e.g. Christmas and Chinese New Year season(Nov 15-Feb 15),
shipping time would be delayed for AT LEAST 14 DAYS,
please see our shipping rate page for detail.
ATTNETION:
Customers please ensure that they are well acknowledged with the shippment detail
BEFORE PURCHASE, please contact us with the item's ASIN and country if there is any question.
J347
SAVE NOW on the special offers below!
Available In Stock. |
| This LCD Display Monitor Screen+Touch Touchscreen Digitizer+2mm Adhesive Double Side Sticker For iPod Touch 4G 4th Gen 4 Generation ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
